Connecting an ESP32 sensor to the BrewBench Monitor App
Below are some basic instructions for connecting a ESP32 sensor to the BrewBench Monitor App. This example uses a Thermistor.

First download the Basic ESP32 sketch under sketches.

Open Arduino Studio and upload the sketch.
Then add the sensor under settings.

Then select the sensor type and port and click play.

Once you get a reading, open the sketches again and download the BrewBench Monitor App ESP32 sketch. This will preconfigure the sketch with the correct pin and sensor type.

Connect the sensor with the BrewBench App, which is the same as connecting BrewBench Stick sensor shown in this youtube video.
https://www.youtube.com/watch?v=_wxQ1_tgW4Y&ab_channel=BrewBench
Cheers